Your Partnership in Power & Control
  • HOME
   Modular controllers SIMATIC S7
       SIMATIC S7-200
Four-line Text Display for the SIMATIC S7-200 PLC          SIMATIC S7-300
         SIMATIC S7-400
     ET 200 Systems for Control Cabinets
         ET 200S
         ET 200M
     Micro Panels
Description          SIMATIC TD 100C

The TD 400C is an especially flexible HMI device for the SIMATIC S7-200. The display can either be configured with four lines and 24 characters per line or with two lines and 16 characters per line. The 15 configurable keys provide tactile feedback, additional visual or acoustical feedback can be set up. The design of the device surface can be individually arranged around the permanently positioned keys.

         SIMATIC TD 200
       SIMATIC TD 200C
       SIMATIC TD 400C
       SIMATIC OP73micro
       SIMATIC TP 177micro
Area of application    
 The TD 400C is suitable for simple to more complex operating tasks with the SIMATIC S7-200 PLC; longer alarm texts and a limited number of functions can also be configured.    
 Ask About This Product
  E-mail Friend

• User-friendly with selectable character size and a display backlight suitable for adverse lighting conditions
• Safe operation thanks to tactile feedback from the keys and additional visual or acoustical feedback
• Device surface can be individually arranged (e.g., in the design of the machine)
• Can be integrated into a PROFIBUS network


Design and functions

The TD 400C is simply connected to the PPI interface of the S7-200 via the supplied connection cable. A separate power supply is not necessary. It is also possible to connect multiple TDs to an S7-200.

If the distance between TD 400C and S7-200 is greater than 2.5 m, an AC adapter for the power supply is required. Instead of the connection cable, PROFIBUS bus lines are then provided.

The configuration data of the TD 400C is stored in the CPU of the S7-200. The alarm texts and configuration parameters are created with the programming software STEP 7-Micro/WIN V4 SP 6 (TD 400 Wizard). Additional parameterization software is not needed.

Technical data    
Display 3.7 inch STN-display
Resolution 192 x 64 pixels

Control elements

15 programmable function keys
User memory Depending on the S7-200 CPU
Interfaces 1 x RS 485
Degree of protection IP 65 front when mounted IP 20 rear
Installation cutout 163,5 x 93,5 mm (W x H)
Front panel 174 x 102 mm (W x H)
Depth 31 mm
Configuration software STEP 7 Micro/Win V4 SP 6 TD 400 Wizard
Copyright @ 2005 All Rights Reserved